Ad Insertion Policies
You can configure a unique ad insertion policy on any category of your content from within Pulse to control the ad serving down to individual content level. The policy states what ad formats can run on this content category, how many linear ads should appear in breaks, how long the duration of the break should be, at what frequency non‐linear ads should appear and if the ads should have a skip button or not. The settings for a category are inherited to all subcategories, but you can choose to override these settings on any sub-level. The ad insertion policies are flexible and can also be applied to devices and content play length. If you want to boost or limit the ad serving on specific devices you can customise that. You can have individual ad insertion policies for long and short video, making it easy to optimise ad load for long or short form to take into account user behaviour around the content type.
When you click on the insertion policy icon, or choose "Ad Insertion Policy Settings" from the desired category's menu, the following page opens up:
Parts of the Insertion Policies Page
|1||Device containers||Choose a device container from the list to configure ad insertion
policies for a specific device container you want to target.
Note: Insertion policies are not inherited across devices.
|2||Override parent policies||The settings for a category are inherited to all subcategories, but you can choose to override these settings on any sub‐level by activating this button. You have to activate the button to be able to configure the insertion policy, otherwise all of the settings are greyed out.|
|3||Short/long form policies||Enable if you want to use different insertion policies for short and long form content.|
|4||Format specific settings||Settings options for different formats. For more information, see below.|
|5||Save Insertion Policies||Click the button to save your insertion policies configuration.|
- Enable or disable interactive and/or standard spot ad formats.
- Time-based Frequency Cap: select the minimum number of minutes that
have to pass before any linear ad can be shown to a viewer again. You can
select from a time range of zero to 10 minutes, or set it to 20, 30, 40, 50
or 60 minutes. Note: Sponsor goals are also affected by this cap.
- Skip Ad Button: select whether to show the skip ad button always,
after first unique view, or never.
Note: Campaigns, goals, and ads inherit the insertion policy settings. You can override these settings on campaign, goal, or ad level. For more information, refer to Override Skip Ad Button Settings.
- Always: selecting this option allows you to set the amount of seconds, or the percentage of the ad, after which the skip button appears.
- After first unique view: selecting this option allows you
- Reset view count after a certain time period. You can choose to reset on a scale from 1-48 hours.
- Set the amount of seconds, or the percentage of the ad, after which the skip button appears.
- Never: selecting this option means that the skip button never appears.
- Pre-roll, Mid-roll, Post-roll, and Seek-roll: enable or disable
pre-roll, mid-roll, post-roll, and seek-roll ads. If enabled:
- Configure position based breaks by selecting the maximum number of ad positions for each ad format per ad break. You can select from a range of zero to 25 ad positions per ad break.
- Configure time based breaks by selecting to limit break
duration, and entering the maximum amount of seconds you want the ad
break to last. For time based breaks, both maximum duration and
maximum number of ad positions have to be specified. The ad break
ends when it reaches the specified duration, or when all its slots
are filled, whichever happens first. The limitations of using time based breaks are:
Note: This feature needs to be enabled for your account. Contact your Account Manager if you want to use time based breaks.
- It guarantees that ad breaks are not longer than the time you set, but it does not guarantee the complete duration limit is filled with ads.
- Ads that are too long (exceed the defined duration limit of the break) are not eligible for time based breaks and will not get selected.
- The forecasting engine cannot always take time based breaks into account. For campaign simulations, we assume the goal always 'fits' within a time-limited break. Depending on the length of ads used in an actual campaign, the forecast could appear to show more available impressions than the campaign can actually deliver in a time-limited break.
- You have to specify the estimated duration of 3rd party ads to make them eligible for time based breaks. If the ad exceeds the duration limit of the break, it will not get selected.
- (Seek-roll only) Configure the minimum number of seek events between breaks, from a range of zero to 25.
- Ad Selector Ads: ad selector ads allow the viewer to select which
advert they want to watch, with a range of 2-6 different adverts to choose
- Max number of ads: select the maximum number of ads on a scale from 2-6, or use default spot settings.
- Begin playback automatically after: enter the amount of seconds after which playback begins automatically.
Pause ad Settings: enable or disable Pause ad functionality.
- Enable or disable the delivery of overlay ads.
- First insertion: the time when the first overlay impression appears. Choose on a scale from 1-60 seconds. The default setting is 20 seconds.
- Display for: the amount of time the overlay is visible before hiding automatically. Choose on a scale from 5-30 seconds. The default setting is 15 seconds.
- New overlay every: the number of minutes that need to pass before a new overlay impression appears. Choose on a scale between 1-10 minutes. The default setting is 4 minutes.
Override Skip Ad Button Settings
There are some occasions when an advertiser does not want their ad to be skippable, so you need to override the insertion policy settings by changing the "skippable" settings on the campaign, goal, or ad level. Find the option as shown below:
Double-click the pen icon. A pop up window opens up:
|Inherits||Inherits settings from parent.|
|Yes||Overrides parent settings and is set to either:
|No||Overrides parent settings and is set to never be skippable.|